Back to Blog
Buying Guides 2026-11-17 Fenix Flashlights | World Leader in Fenix® Sales | Fenix Lighting USA 0 views

ALG-01 Rail Mount Discontinued: Your Picatinny Mount Options

ALG-01 Rail Mount Discontinued: Your Picatinny Mount Options

The Fenix ALG-01 rail mount is discontinued. Check its 23.6–26 mm fit range, then use these practical checks to choose a compatible Picatinny flashlight mount.

Start with the fit range, not the label

The Fenix Flashlight Rail Mount (ALG-01) is discontinued, so the practical question is not which listing still says ALG-01 but which mount matches your light body and your rail. The ALG-01 record gives you a useful baseline: it fits any flashlight diameter from 0.93″ to 1.02″ (23.6–26 mm) and attaches to a Picatinny/Weaver rail.

Measure the widest part of your flashlight body where the mount will clamp, not the bezel or tail cap. If that measurement falls inside 23.6–26 mm, a replacement with the same stated range is the closest starting point. If it falls outside, the ALG-01 was never the right fit, and you need a mount whose published range covers your light.

What the ALG-01 record confirms

Four checks before you buy any Picatinny flashlight mount

  • Light body diameter: Compare your measured diameter with the mount's published range. A mount listed as fitting 23.6–26 mm is the direct equivalent of the ALG-01's stated range; anything narrower or wider needs its own measurement check.
  • Rail type: The ALG-01 record specifies Picatinny/Weaver. Confirm your rail is one of those, and confirm the replacement states the same interface rather than a proprietary or dovetail system.
  • Fastener and hardware: The ALG-01 used steel hex screws and included an Allen wrench and spacer. Check that a replacement lists its fasteners and included hardware so you are not guessing at the range bag.
  • Weight and material: At 1.8 oz. (51 g) in machined aluminum, the ALG-01 gives you a reference point. A much heavier mount changes how the setup balances; a much lighter one may use different materials.

What the ALG-01 record does not settle

The supplied record does not include installation torque values, thread-locking guidance, or a list of specific flashlight models confirmed to fit. It also does not confirm whether the spacer changes the effective diameter range. Treat those as open questions rather than assuming the ALG-01's numbers transfer unchanged to another mount.

That matters most when you are matching a replacement to a particular light. A mount can publish the same 23.6–26 mm range and still differ in clamp shape, screw length, or spacer thickness. If the replacement's listing does not answer those points, ask the seller before you rely on it.

A practical way to choose your replacement

Write down three things: your light's measured body diameter, your rail type, and whether you need the mount to include an Allen wrench and spacer. Then compare each candidate against those three points before price or finish.

If your light measures within 23.6–26 mm and your rail is Picatinny/Weaver, prioritize a mount that states both facts plainly and lists its hardware. If either fact is missing from the listing, that is your signal to keep looking or to ask the seller directly. The ALG-01 is discontinued, but its published fit range remains a useful yardstick for judging what replaces it.

Related Articles

Customer Service
Home
Products
Cart
Profile