Soporte para interruptor de presión Fenix ALG-06: Guía de montaje en riel

Quick Answer

To set up the Fenix ALG-06 pressure switch mount, attach it to a Multi Rail Mount System guide rail and secure your Fenix AER remote pressure switch in place. Follow the steps below for a firm, reliable installation.

Step-by-Step ALG-06 Installation

1. Identify the mounting location: Decide where on your Multi Rail Mount System rail you want the pressure switch. Choose a spot that is within easy reach of your thumb or finger, without interfering with other accessories. Check that the area is clear of any obstructions before proceeding.
2. Position the ALG-06 mount: Place the ALG-06 mount over the rail so that the mounting slots align with the rail grooves. Ensure the mount sits flat and level against the rail. If the mount does not sit flush, adjust its position before tightening.
3. Insert the AER pressure switch: Slide your Fenix AER remote pressure switch into the mount's holder. Make sure it clicks or fits snugly into place. The switch should not wobble or move freely. If the switch feels loose, double-check that you are using an AER series switch.
4. Tighten the mounting screws: Use the appropriate tool to tighten the screws on the ALG-06 mount. Do not overtighten, as this could strip the threads or damage the rail. A common mistake is overtightening—stop as soon as the mount is secure.
5. Test the switch and mount: Press the pressure switch to ensure it activates your light reliably. Also, wiggle the mount gently to confirm it is firmly attached to the rail. If the switch does not respond, check the connection between the switch and your light.

Product Facts

• Fenix ALG-06 Pressure Switch Mount for Multi Rail Mount Systems: The Fenix ALG-06 is designed for Fenix AER series tactical remote pressure switches and attaches to a Multi Rail Mount System guide rail. This ensures a secure, tailored fit for your AER switch, reducing the risk of it shifting or detaching during use.