Fenix PD40R V2.0 Rechargeable Flashlight - DISCONTINUED

The Fenix PD40R V2.0 rechargeable flashlight features a patented rotary switch which allows you to quickly select a brightness level with a simple twist (NO REAR SWITCH ACTIVATION OR MOMENTARY CAPABILITY). No more fumbling for a small button in the dark with gloves on. Turn the switch to the right to activate the flashlight and access each mode; including turbo mode which produces an incredible 3000 lumens and throws that light 1329 feet (405m). Powered by an included 21700 rechargeable li-ion battery, this flashlight is USB Type-C rechargeable and includes a battery level indicator, so you always know the status of the battery.

IP68 rated dustproof and waterproof underwater to 2 meters, this flashlight is built tough. The Fenix PD40R rechargeable flashlight is the perfect option for those looking for optimal brightness from an extremely easy to use flashlight.

Specifications

Max Lumens: 3000 Max Beam Distance: 1329 feet (405 meters) Max Runtime: 88 hours 10 min. Lighting Modes: 4 brightness levels, and strobe Bulb Type: Luminus SST70 LED Size: Length: 5.4” (138mm) Body: 1.0” (26mm) Head: 1.3” (33.2mm) Weight: 4.1 oz. (117g) weight excluding battery Battery: One 21700 rechargeable li-ion battery (included) or one 18650 rechargeable li-ion battery with the ALF-18 battery holder (not included) Included: ARB-L21-5000 rechargeable Li-ion battery, USB Type-C charging cable, Lanyard, Holster, Spare O-ring Warranty: Limited Lifetime Guarantee from Fenix Lighting USA

Additional Features of the Fenix PD40R Flashlight:

• 3000 lumens maximum output, 405 meters maximum beam distance.
• A Luminus SST70 LED with a lifespan of 50,000 hours.
• Patented technique of rotary mode selection switching for accurate operation.
• Included a 5000mAh 21700 rechargeable LI-ion battery.
• Inner waterproof USB Type-C charging port.
• Made of A6061-T6 aluminum.
• Premium type HAIII hard-anodized anti-abrasive finish
• Boot-up battery level indication.
• Reverse polarity protection, to protect from improper battery insertion.
• Anti-roll and anti-slip body design.

*Please note this light requires a wall charger that is at least 2 AMPS for proper charging.

Battery Specifications for PD40R V2.0

Type	Dimensions	Nominal Voltage	Usability
Fenix ARB-L21	21700	3.6V	Recommended	√√
Rechargeable battery (Li-ion)	21700	3.6V	Caution	！
Rechargeable battery (Li-ion)	18650	3.6V	Banned*	×

Warning: Do not mix batteries of different brands, sizes, capacities or types. Doing so may cause damage to the flashlight or to the batteries being used. 21700 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.

* An 18650 battery can be used when used in conjunction with an ALF-18 Battery Holder.

Usage and Maintenance

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using an excellent quality battery.
• If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
• Li-ion battery needs to be charged even if the battery is not exhausted, charge immediately when the battery is exhausted; it has no memory effect.
• Unscrew the tail cap half a turn or take out the battery to prevent accidental activation during storage or transportation.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
• Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
  A: The battery needs replacing.
  Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s specifications).
  B: The threads, PCB board contact or other contacts are dirty.
  Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please contact your authorized distributor.