TK16 Fenix Flashlight - DISCONTINUED

The Fenix TK16 flashlight delivers functionality and performance, authorizing it as a reliable and necessary tool for emergency and tactical applications. This LED light is the first to feature Fenix’s new Dual Tactical Tail Switch for one-finger operation including instant access to strobe and momentary functions. Compact body design with one inch body width and slightly larger head is perfect design for current duty belts in Law Enforcement, Security, Industrial and Commercial applications.

Specifications

Max Lumens: 1000 Max Beam Distance: 787 feet (240 meters) Max Runtime: 150 hours Lighting Modes: 4 brightness levels, and strobe Bulb Type: Cree XM-L2 U2 LED Size: Length: 5.5″ (140mm) Body Width: .98″ (25mm) Head Width: 1.3″ (34mm) Weight: 4.3 oz. (122g) weight excluding batteries Battery: 2xCR123A battery or one 18650 Li-ion battery Included: Holster, clip, lanyard and two spare O-rings Warranty: Limited Lifetime Guarantee from Fenix Lighting USA

Additional Features of the Fenix TK16

• Uses Cree XM-L2 U2 LED with a lifespan of 50,000 hours
• Powered by one 18650 rechargeable Li-ion battery or two 3V CR123A Lithium batteries
• 140mm(length) x 25mm(diameter) x 34mm(head)
• 122-gram weight (excluding battery)
• Digitally regulated output maintains constant brightness
• Reverse polarity protection, to protect from improper battery installation
• Anti-roll, slip-resistant body design
• Tactical tail switch for momentary-on function
• Tail mode switch for easy and fast output selection, instant Strobe mode
• Made of durable aircraft-grade aluminum
• Premium type III hard-anodized anti-abrasive finish
• Toughened ultra-clear glass lens with anti-reflective coating

• Operating Instructions
• Frequently Asked Questions
• Compatible Accessories

Operating Instructions

Operation Instruction

Battery Specification

Type	Dimensions	Nominal Voltage	Usability
Fenix ARB-L2 Series	18650	3.7V	Recommended	√
Non-rechargeable Battery(Lithium)	CR123A	3V	Usable	√
Rechargeable Battery(Li-ion)	16340**	3.6V/3.7V	Cautious*	！
Rechargeable Battery(Li-ion)	18650	3.6V/3.7V	Cautious*	！
Rechargeable Battery(LiFePO4)	16340**	3.2V	Usable	√
Rechargeable Battery(LiFePO4)	18650	3.2V	Banned	×

Warning: Please do not mix batteries of different brands, sizes, capacities or types. Doing so can cause damage to the flashlight or the batteries being used.

*18650/16340 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Quality batteries with circuit protection will reduce the potential for combustion or explosion but cell damage or short circuiting are potential risks the user assumes.

**Only compatible with convex anode battery.

Usage and Maintenance

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using excellent quality batteries. If the flashlight will not be used for an extended period, remove the battery, or the flashlight could be damaged by electrolyte leakage or battery explosion.
• Unscrew the tail cap one-half turn or take out the battery to prevent accidental activation during storage or transport.
• Low-voltage Warning Function: When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level. When this happens in Low output mode, the flashlight blinks three times every five minutes to remind you to replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work until the batteries run out completely.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.
• Periodic cleaning of the battery contacts improves the flashlight's performance as dirty contacts may cause the flashlight to flicker, shine intermittently or even fail to illuminate for the following reasons:

Reason A: The batteries need replacing.

Solution: Replace batteries (Please confirm the correct installation of anode and cathode). Reason B: The threads, PCB board contact or other contacts are dirty.

Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol. If the above methods don't work, please refer to the warranty policy before contacting your authorized distributor.

*Notice: The routine cleaning video can be watched and downloaded through Fenix official website, please log onto the service channel->“maintenance for light”.

Frequently Asked Questions

No FAQs available.

Compatible Accessories

• 

  Red Filter Adapter Medium (AOFM) - DISCONTINUED

  $6.95

• 

  Diffuser Tip (AOD-M)

  $4.00

• 

  Traffic Wand - Medium (AOT-M)

  $5.00

• 

  Fenix ALG-00 Picatinny Rail Mount

  $19.95

• 

  Flashlight Rail Mount (ALG-01) - DISCONTINUED

  $14.00

• 

  Bike Mount (ALB-10)

  $20.00

• 

  Fenix ALC-01 Quick-Release Belt Clip - DISCONTINUED

  $12.95

• 

  Fenix 18650 Rechargeable Batteries

  $9.95

• 

  Fenix AER-03 V2.0 Remote Switch

  $15.96

• 

  Fenix Flashlight Holsters (ALP-MT) - DISCONTINUED

  $14.00