The fit question comes before the price
A remote pressure switch only works if its tail adapter threads onto your flashlight and its pad lands where your support hand already sits. The Fenix AER-03 V2.0 bundle solves the second half with an included ALG-05 Picatinny mount, but the first half is on you: the supplied record lists the tail adapter thread as Tr24 x 1.5 mm and names the TK26R as compatible. If your light uses a different tail thread, this is not the switch for it.
This guide walks through the checks that decide whether the AER-03 V2.0 belongs on your rail, what the bundle actually contains, and where the catalog stops short so you can ask the right question before ordering.
What the AER-03 V2.0 bundle includes
- Fenix AER-03 V2.0 Remote Pressure Switch with ALG-05 Mount: Bundle includes the AER-03 V2.0 remote pressure switch and the ALG-05 tactical remote pressure switch mount; the ALG-00 or ALG-01 rail mount for the flashlight is not included and must be purchased separately. The ALG-05 holds the pressure switch pad to the rail. It does not attach the flashlight body to the rail, so you need a separate rail mount for the light itself.

Fenix AER-03 V2.0 Remote Pressure Switch with ALG-05 Mount - Fenix AER-03 V2.0 Remote Pressure Switch with ALG-05 Mount: Cable ties and Velcro are included for attaching the remote switch, in addition to the ALG-05 mount. You can route the cable and pad without buying extra fasteners, and you have a non-rail option if the ALG-05 position does not suit your handguard.
Three checks before you order
- Tail thread and model: The record specifies a Tr24 x 1.5 mm tail adapter thread and names the TK26R as compatible. Confirm your flashlight's tail thread matches before assuming fit; the supplied information does not list every compatible model.
- Rail standard: The ALG-05 fits MIL-STD-1913 Picatinny rails. If your handguard uses a different rail standard, the included mount will not clamp on, and you would rely on the included cable ties or Velcro instead.
- Your flashlight's own rail mount: The bundle does not include the ALG-00 or ALG-01 rail mount for the flashlight. If your light is not already on a rail mount, budget for one separately.
What the pressure pad controls—and what it may not
The AER-03 V2.0 uses a noiseless pressure pad rated for 100,000 activations and a tactical round switch for momentary-on and constant-on. Mode or output selection is supported only on select flashlights, according to the record. That caveat matters for buyers: if switching modes from the pad is essential to your setup, verify your specific flashlight supports it before purchase, because the supplied information does not name which models do.
The pad and tail adapter are built for hard use: the tail adapter is T6-grade aluminum with a type III hard-anodized finish, the cable is PU, and the switch is IP68 rated dustproof and waterproof to 2 m. Those are the manufacturer's stated ratings, not a substitute for checking your light's own tail-thread compatibility.
Dimensions that affect routing
- Fenix AER-03 V2.0 Remote Pressure Switch with ALG-05 Mount: Cable length is 9.1 in (23 cm); overall length is 13.4 in (34 cm); weight is 1.4 oz (40 g); tail adapter measures 1 in (26.5 mm) x 1.3 in (32 mm). These figures let you plan cable routing along a handguard and check whether the tail adapter's footprint clears your light's tail cap and any rail-mounted accessories.
Mounting the ALG-05 on a Picatinny rail
The ALG-05 is made of A6061-T6 aluminum with a HAIII hard-anodized, non-reflective matte black finish. According to the record, it attaches to any standard Picatinny rail with a simple push, creating a secure hold for the AER pressure switch. The switch itself can also be secured with the included cable ties or Velcro if the rail position does not work for your grip.
The supplied information does not include a torque specification, thread-locking guidance, or a recommended rail slot position for the ALG-05. Treat those as open questions rather than assuming a value, and follow any instructions that come with the mount.
Bundle versus switch-only: which to buy
- Buy the bundle if…: You have a MIL-STD-1913 Picatinny rail free and want the pad held in a fixed position. The ALG-05 is included, along with cable ties and Velcro as backups.
- Consider switch-only if…: You already own an ALG-05 or plan to fasten the pad with cable ties or Velcro. The record notes that AER series switches can be purchased separately from the mount when not buying the bundle.
- Do not buy either if…: Your flashlight's tail thread is not Tr24 x 1.5 mm or your light is not confirmed compatible. The switch cannot be adapted to a different thread with the supplied parts.
Where the supplied information stops
The record names the TK26R as compatible and gives the tail thread, but it does not provide a full compatibility list, state which flashlights support mode selection from the pad, or include installation torque values. If your light is not the TK26R, confirm tail-thread fit and pad function with the seller before ordering. That one check prevents most returns on remote pressure switches.

